When you use the right tool for the job everything is just easier. We carry a range of brake tools designed to help you do better work with less hassles.
-
Details
Never be afraid to remove a rusty bleed screw again. This kit turns you into the bleed screw assassin. In the past you've removed them gently now you'll get to crush them with an air hammer. After simply remove the screw now filled with wire and solid as a steel bolt. Once done flick them into the trash can like a cigarette butt.
Pull out a freshly manufactured replacement from your kit, install it, and bleed your brakes in less time than you would have spent looking for your screw extraction kit.
Includes tool, large variety of replacement screws and caps. Black mask not included.
-
Details
Create professional flares with a simple pull of the lever. Create SAE single and double flares in 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″ tube including stainless. This kit also includes our exclusive AN 37 degree set for 3/16″, 1/4″, 5/16″, and 3/8″. If that wasn't enough you can also create 3/16″ bubble and DIN for European and Asian vehicles.
-
Details
Form your own hard lines in steel, copper nickel, or stainless steel. Never dread flaring a brake line again. With simple 2 step operation even the new guy in your shop will be able to make professional grade flares on day one.
Flares: SAE 45 Degree in 3/16″, 1/4″, 5/16″, 3/8″ Tube as well as 3/16 DIN. -
Details
Professional hose cutter . Slices through brake hose like butter… Well not as easily as say warm butter. But who wants to cut butter with anything but a knife anyway? That’s just gross.
-
Details
Simple plastic brake hose cutter gets the job done. Makes a clean cut without much drama.
-
Details
Single replacement blade for the Professional Hose Cutter
-
Details
Mini tube cutter. It works by spinning around the tube tightening the thumb screw each pass until separation. You can use it on stainless if you only need to do a few cuts but it's pretty hard (on stainless). Regular steal or copper nickel is more appropriate.
-
Details
Any tube job will be made better with the right tool for the job. This telescoping tube cutter is about the best you can get short of involving some sort of power tool. The large adjustment knob makes it easy to tighten as you cut. Includes a built in de-burr tool on the back.
-
Details
Straighten or Bend 3/16″ to 1/4″ tube on the vehicle or in your hand. After you've done the hard work installing brake tube on your car simply squeeze these pliers around any imperfections to get the straight line you need. The radius edge can also be used to make smooth bends without changing tools. It even works to straighten standard coils into ready to flare straights.
Works on 3/16″ to 1/4″ steel, bundy, or copper nickel tube.
